|
|
|
Home - Resources
- Saturn Recalls
- 1991
Saturn Recall Lookup
Many vehicles have Saturn "factory-authorized" recalls where repairs can be completed at no charge
to the customer. Check to see if your vehicle has any outstanding recalls, and schedule a
service appointment to see if you qualify for a FREE repair.
If you would like to check on any Recall Notices announced by the NHTSA for your vehicle, please enter the appropriate
year and model.
1991 Nissan Recalls
|
|
|
|
NHTSA CAMPAIGN ID Number: 09E025000
Component: EXTERIOR LIGHTING:HEADLIGHTS
Manufacturer: NISSAN NORTH AMERICA, INC.
Potential Number of Units Affected: 42540
Year: 1991
Make: Nissan
Model: Maxima
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 2009-05-11
Summary:
DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
DOPE, INC. WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON JULY 28, 2009. OWNERS MAY CONTACT DOPE, INC. AT 1-626-272-1798.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 09E012000
Component: EXTERIOR LIGHTING
Manufacturer: NISSAN NORTH AMERICA, INC.
Potential Number of Units Affected: 16270
Year: 1991
Make: Nissan
Model: Maxima
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 2009-04-07
Summary:
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 09E012000
Component: EXTERIOR LIGHTING
Manufacturer: NISSAN NORTH AMERICA, INC.
Potential Number of Units Affected: 16270
Year: 1991
Make: Nissan
Model: Pickup
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 2009-04-07
Summary:
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 06E049000
Component: EXTERIOR LIGHTING
Manufacturer: NISSAN NORTH AMERICA, INC.
Potential Number of Units Affected: 27176
Year: 1991
Make: Nissan
Model: Pickup
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 2006-05-24
Summary:
CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.
CK MOTORSPORT WILL NOTIFY OWNERS AND REPLACE THE NONCOMPLIANT LAMPS FREE OF CHARGE. THE RECALL BEGAN ON JULY 1, 2006. OWNERS MAY CONTACT CK MOTORSPORT AT 1-909-610-7211.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 06E026000
Component: EXTERIOR LIGHTING
Manufacturer: NISSAN NORTH AMERICA, INC.
Potential Number of Units Affected: 61944
Year: 1991
Make: Nissan
Model: Maxima
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 2006-03-23
Summary:
CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.
PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 97V071000
Component: SEAT BELTS:REAR
Manufacturer: NISSAN NORTH AMERICA, INC.
Potential Number of Units Affected: 36000
Year: 1991
Make: Nissan
Model: Nx
Manufactured
from: 1990-10-01
to: 1991-12-31
Recall Date: 1997-04-22
Summary:
THE RELEASE BUTTON USED IN THE REAR SEAT BELT BUCKLES WERE NOT MADE ACCORDING TO SPECIFICATIONS. IN HOT WEATHER, THE PLASTIC WELDS SECURING THE RELEASE BUTTON TO THE SPRING CAN FAIL RESULTING IN PARTIAL ENGAGEMENT OF THE SEAT BELT TONGUE IN THE BUCKLE OR NOT BEING ABLE TO LATCH THE SEAT BELT.
IF A PARTIAL ENGAGEMENT OCCURS, THIS CAN CAUSE THE SEAT BELT TONGUE TO COME OUT OF THE BUCKLE IN THE EVENT OF A CRASH OR HARD BRAKING OF THE VEHICLE.
DEALERS WILL REPLACE ALL REAR SEAT BELT BUCKLES WITH NEW SEAT BELT BUCKLES.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 95V244000
Component: FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
Manufacturer: NISSAN NORTH AMERICA, INC.
Potential Number of Units Affected: 747000
Year: 1991
Make: Nissan
Model: Maxima
Manufactured
from: 1988-08-01
to: 1994-02-01
Recall Date: 1995-12-15
Summary:
IT IS POSSIBLE FOR A MIXTURE OF MUD AND SALT TO GET TRAPPED BETWEEN THE FUEL FILLER TUBE AND WHEEL HOUSING. THE TRAPPED MUD AND SALT CAN RESULT IN CORROSION OF THE FUEL FILLER TUBE AND THE WHEEL HOUSING.
SIGNIFICANT CORROSION OF THE FUEL FILLER TUBE MAY RESULT IN FUEL LEAKS WHICH IN THE PRESENCE OF AN IGNITION SOURCE COULD RESULT IN A FIRE. IN ADDITION, THE LEFT REAR SEAT BELT RETRACTOR IS MOUNTED TO THE WHEEL HOUSING AND IN THE EVENT OF SIGNIFICANT CORROSION, AND THE MOUNTING COULD FAIL IN A VEHICLE CRASH.
DEALERS WILL INSPECT THESE VEHICLES AND CORRECTIVE ACTION WILL BE TAKEN DEPENDING UPON THE EXTENT OF THE CORROSION.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 95V244000
Component: FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
Manufacturer: NISSAN NORTH AMERICA, INC.
Potential Number of Units Affected: 747000
Year: 1991
Make: Nissan
Model: Stanza
Manufactured
from: 1988-08-01
to: 1994-02-01
Recall Date: 1995-12-15
Summary:
IT IS POSSIBLE FOR A MIXTURE OF MUD AND SALT TO GET TRAPPED BETWEEN THE FUEL FILLER TUBE AND WHEEL HOUSING. THE TRAPPED MUD AND SALT CAN RESULT IN CORROSION OF THE FUEL FILLER TUBE AND THE WHEEL HOUSING.
SIGNIFICANT CORROSION OF THE FUEL FILLER TUBE MAY RESULT IN FUEL LEAKS WHICH IN THE PRESENCE OF AN IGNITION SOURCE COULD RESULT IN A FIRE. IN ADDITION, THE LEFT REAR SEAT BELT RETRACTOR IS MOUNTED TO THE WHEEL HOUSING AND IN THE EVENT OF SIGNIFICANT CORROSION, AND THE MOUNTING COULD FAIL IN A VEHICLE CRASH.
DEALERS WILL INSPECT THESE VEHICLES AND CORRECTIVE ACTION WILL BE TAKEN DEPENDING UPON THE EXTENT OF THE CORROSION.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 95V103002
Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Manufacturer: NISSAN NORTH AMERICA, INC.
Potential Number of Units Affected: 2730462
Year: 1991
Make: Nissan
Model: Sentra
Manufactured
from: 1986-08-01
to: 1991-07-01
Recall Date: 1995-05-24
Summary:
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED FREE OF CHARGE.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 95V103002
Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Manufacturer: NISSAN NORTH AMERICA, INC.
Potential Number of Units Affected: 2730462
Year: 1991
Make: Nissan
Model: 240sx
Manufactured
from: 1986-08-01
to: 1991-07-01
Recall Date: 1995-05-24
Summary:
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED FREE OF CHARGE.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 95V103002
Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Manufacturer: NISSAN NORTH AMERICA, INC.
Potential Number of Units Affected: 2730462
Year: 1991
Make: Nissan
Model: Pathfinder
Manufactured
from: 1986-08-01
to: 1991-07-01
Recall Date: 1995-05-24
Summary:
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED FREE OF CHARGE.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 95V103002
Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Manufacturer: NISSAN NORTH AMERICA, INC.
Potential Number of Units Affected: 2730462
Year: 1991
Make: Nissan
Model: Truck
Manufactured
from: 1986-08-01
to: 1991-07-01
Recall Date: 1995-05-24
Summary:
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED FREE OF CHARGE.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 91V022000
Component: SEAT BELTS
Manufacturer: NISSAN NORTH AMERICA, INC.
Potential Number of Units Affected: 165000
Year: 1991
Make: Nissan
Model: Sentra
Manufactured
from: 1989-06-01
to: 1991-01-01
Recall Date: 1991-02-08
Summary:
IMPROPER BELT GUIDE PERFORMANCE CAN CAUSE FRAYING OF THE SHOULDER SAFETY BELTS NEAR THE RETRACTOR.
THE FRAYING OF THE SHOULDER SAFETY BELT WEBBING CAN CAUSEIMPROPER RETRACTION OF THE BELT, WHICH WOULD LEAD TO INADEQUATE PROTECTION OFSEAT OCCUPANT DURING A SUDDEN STOP OR ACCIDENT, AND COULD RESULT IN INCREASEDRISK OF INJURY.
MODIFY THE SAFETY BELT GUIDES TO PREVENT FRAYING; AND OR REPLACE RETRACTOR ASSEMBLY IF FRAYING IS PRESENT.
|
As a new car dealer, Vaden Automotive is authorized to sell Saturn Service Contracts by the General Motors Protection Plan (GMPP).
Vaden Automotive - 9393 Abercorn Street - Savannah, GA 31406
Service Contract Sales 1-877-466-9166
|
|
|
